Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. A central air
   15.1. Specifications
   15.2. The instruction on coolant application
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Check of elements of the central air established on the car
   15.6. Installation of manometres for pressure measurement
   15.7. Откачка atmospheric air from a central air
   15.8. Gymnastics of a central air of air
   15.9. Check of level of a coolant
   15.10. Check of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. The conditioner compressor
   15.14. The plug of coupling and a pulley of the compressor of the conditioner
   15.15. The coil of excitation of coupling
   15.16. Compressor check on the car
   15.17. The gauge of threefold (double) pressure
   15.18. The fan and the condenser
   15.19. The evaporator
   15.20. Check of the thermostatic gauge (термистора)
   15.21. The air filter of the evaporator
   15.22. The heating and ventilation block
   15.23. The heater block
   15.24. The fan
   15.25. Search and elimination of malfunctions
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes


944881c0






15.13. The conditioner compressor
1 – the conditioner compressor;
2 – a bolt, 20,4–30,6 Н•м;
3 – a pulley of the compressor of the conditioner;
4 – a bolt, 17 Н•м;
5 – an arm the conditioner compressor;
6 – a tension roller;
7 – a belt of a drive of the compressor of the conditioner;
8 – a pulley of a cranked shaft.

Removal and installation


PERFORMANCE ORDER
1. Discharge air central air.
2. Disconnect an electric socket from electromagnetic муфты.
3. Lift the car.
4. Ослабьте a tension also remove a belt of a drive of the compressor of the conditioner.
5. If necessary turn out bolts of fastening of the forward muffler.
6. Remove a hose of a discharge and soaking up filter.
7. Turn out bolts of fastening of the compressor of the conditioner.
8. Remove the conditioner compressor. Immediately close all open apertures and tubes for an exception of hit of a moisture of air in air central air.
9. Installation is spent to sequences, return to removal, taking into account the following:

– Fill in in the compressor fresh oil;
– Before installation of sealing rings oil them;
– Do not grease connecting nuts of unions of the compressor of the conditioner;
– Tighten entrance and target hoses the demanded moment;
– Adjust a tension of a belt of a drive of the compressor of the conditioner.