Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. A transmission
   + 9.1. A mechanical transmission
   - 9.2. An automatic transmission
      9.2.1. Specifications
      9.2.2. A control lamp of malfunctions (MIL)
      9.2.3. Diagnostic codes of malfunctions
      9.2.4. Reading of codes of malfunctions
      9.2.5. Pressure check трансмиссионной liquids
      9.2.6. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      9.2.7. Check of level of a liquid in an automatic transmission
      9.2.8. Check of work of the lever of the selector
      9.2.9. Adjustment of the switch of indication of position of the lever of the selector
      9.2.10. Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear
      9.2.11. Pressure adjustment in a highway
      9.2.12. Replacement of an oil sealing ring of a power shaft
      9.2.13. Replacement of a cable of a drive of a speedometer
      9.2.14. Removal and transmission installation
      9.2.15. Transmission repair
      9.2.16. The selector lever
      9.2.17. Adjustment of a cable of management
      9.2.18. Repair of the lever of the selector
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes








9.2.10. Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear
PERFORMANCE ORDER
1. Clear all dirt of the screw of adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear.
2. Ослабьте a counternut.
3. Two times ослабьте also tighten the screw of adjustment by the moment of an inhaling 5 Н•м.
4. After a tightening of the screw of adjustment by the moment of an inhaling 5 Н•м ослабьте it on 3–31/3 turns.
5. Tighten a counternut the demanded moment.

The inhaling moment: 15–22 Н•м


The prevention

Before adjustment put hermetic DC780на a carving of the screw of adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear.