Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. A transmission
   + 9.1. A mechanical transmission
   - 9.2. An automatic transmission
      9.2.1. Specifications
      9.2.2. A control lamp of malfunctions (MIL)
      9.2.3. Diagnostic codes of malfunctions
      9.2.4. Reading of codes of malfunctions
      9.2.5. Pressure check трансмиссионной liquids
      9.2.6. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      9.2.7. Check of level of a liquid in an automatic transmission
      9.2.8. Check of work of the lever of the selector
      9.2.9. Adjustment of the switch of indication of position of the lever of the selector
      9.2.10. Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear
      9.2.11. Pressure adjustment in a highway
      9.2.12. Replacement of an oil sealing ring of a power shaft
      9.2.13. Replacement of a cable of a drive of a speedometer
      9.2.14. Removal and transmission installation
      9.2.15. Transmission repair
      9.2.16. The selector lever
      9.2.17. Adjustment of a cable of management
      9.2.18. Repair of the lever of the selector
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes

9.2.18. Repair of the lever of the selector
Elements of the lever of the selector

1 – the solenoid of the lock of blocking;
2 – the switch of position N of the lever of the selector;
3 – a spring pin;
4 – a spring pin;
5 – a steel ball;
6 – a ball support;
7 – a spring; 8 – a hairpin;
9 – the selector lever;
10 – an adjusting cam of the lever;
11 – a core of the lever of the selector;
12 – a spring of the lever of the selector;
13 – the plug;
14 – an arm.

Check

PERFORMANCE ORDER

1. Check up a clamp installation site on absence of deterioration.

2. Check up a spring on absence of damages and elasticity loss.

3. Check up a hairpin in the lever basis on absence of deterioration.

Assemblage

PERFORMANCE ORDER

1. Grease a sliding part of the plug.
Greasing: SAE J310, NLGI №2

2. Put greasing in the places shown in drawing.
Greasing: SAE J310, NLGI №2